Our Annual Furnace or AC Tune-Up Will Keep Your Home Safe, Comfy, and Cozy
Protect your home and family with an annual Furnace or AC tune-up.
Our performance tune-ups help keep your heating and cooling system safe, efficient, and reliable.
Gorjanc Furnace Installation Reviews and Recommendations
Better Health
Cleaner Air
Pure ComfortEmpty heading
Empty heading
At Gorjanc Home Services, we know a properly tuned furnace and AC system keep your family safe, warm, and cozy.
46-Point Tune-Up
Carbon Monoxide Testing
Improved Performance
Your High-Performance $169 HVAC Tune-Up includes
- Digital combustion analysis
- Carbon monoxide analysis with CO reading
- Test thermostat operation
- Inspect thermostat condition and batteries
- Check air filter condition
- Inspect air filter housing and air seal
- Inspect furnace cabinet, panels, fasteners, and blower compartment
- Confirm blower wheel rotates freely
- Check blower wheel and compartment cleanliness
- Check blower mounts and set screws
- Measure and record blower motor amperage
- Measure and record blower motor capacitor reading
- Measure and record supply air temperature
- Measure and record return air temperature
- Calculate temperature rise and compare to manufacturer specifications
- Inspect heat exchanger if accessible
A professional furnace tune-up helps:
- Improve system reliability
- Reduce the risk of unexpected breakdowns
- Support safer furnace operation
- Improve airflow and comfort
- Identify small issues before they become expensive repairs
- Help your furnace operate as efficiently as possible
- Create a documented service history for your equipment
- Check burners for cleanliness and proper alignment
- Check manifold gas pressure
- Measure and test igniter
- Measure and test flame sensor
- Measure and test pressure switch operation
- Check limit and safety switches
- Check inducer motor operation and amperage
- Inspect furnace electrical switch
- Inspect electrical connections and wiring inside furnace cabinet
- Inspect accessible ductwork connections
- Inspect flue venting and connections
- Inspect intake piping and connections
- Check condensate tubing, ports, and drains
- Check condensate pump if applicable
- Cycle and test furnace operation
- Inspect humidifier if installed
- Check humidifier water panel condition
- Check humidifier solenoid, transformer, and circuit board
- Verify humidifier water line is open and drip-free
- Confirm humidistat, damper, and humidifier operation
- Inspect air purifier or UV light if installed
- Confirm air purifier or UV light is powered and energized
- Clean applicable air purifier contacts
- Review system condition with homeowner
Call Gorjanc at 216-464-4647 to schedule your professional furnace tune-up before Northeast Ohio’s weather turns cold!
-
What does a 46-point gas furnace inspection include?
A furnace tune-up is more than a quick look at your heating system. Our 46-point furnace tune-up is a detailed inspection, cleaning, testing, and performance check designed to help your furnace run safely, reliably, and efficiently all season long.
- We start by documenting your furnace and confirming how it’s performing before service begins.
- Your thermostat controls comfort throughout the home, so we verify its condition and operation.
- Clean airflow helps your furnace heat consistently and operate efficiently.
- Combustion and the heat exchanger focus on safe heating operation and proper combustion.
- Loose connections and electrical issues can lead to breakdowns or unsafe operation.
- For high-efficiency furnaces, clear drainage is essential for reliable performance.
- If your system includes a whole-home humidifier, we inspect key components.
- If your system includes indoor air quality accessories, we verify basic operation.
-
What does a 46-point air conditioning inspection include?
- Test Thermostat Operation
- Inspect Air Filter Housing & Air Seal
- Check Air Filter
- Inspect Cabinet, Fasteners, Panels, and Blower Compartment
- Blower Wheel Rotates Freely
- Check Blower Mounts
- Measure and Record Blower Motor Amperage
- Measure and Record Blower Motor Capacitor Reading
- Measure and Record Leaving Supply Air Temperature
- Measure and Record Return Air Dry Bulb Temperature
- Measure and Record Return Air Wet Bulb Temperature
- Calculate Temperature Delta and Confirm it Falls within Manufacturer's Specifications
- Indoor Coil, Identify Metering Device
- Outdoor Unit Is It Level
- Outdoor Unit Is It Clear of Vegetation & Shrubs
- Inside Cabinet Clear of Leaves and Debris
- Rinse Condenser Coil if Needed
- Check Outdoor Disconnect Properly Fused
- Check Outdoor Disconnect and Sealtite for Water Tight
- Visually Inspect Contactor for Pitting or Debris
- Line Voltage Reading
- Measure and Record Voltage Drop at Contactor
- Measure and Record Condenser Fan Amperage
- Measure and Record Compressor Readings
- Measure and Record Dual Capacitor Rating and Readings
- Identify Refrigerant Type for System
- Record Outdoor Temperature at Time of Tune-up
- Record Suction and Liquid Line
- Record SuperHeat (SH)
- Record SubCooling (SC)
- Inspect Accessible Refrigeration Lines and Insulation
- Inspect Electrical Connections and Wires Inside Cabinet
- Inspect Accessible Ductwork for Proper Connections and Hangers
- Inspect Ductwork for Proper Sealing
- Check Condensate Drain
- Check Condensate Pump
- Cycle and Test Unit Operation
-
How Does a Maintenance Membership Save Money?
Maintenance Membership Option
- Get TWO (2) 46-point Precision Tune-Ups & Inspections per year (Air conditioning and furnace)
- Parts and Labor Warranties
- 10% Off Services
- And more!
-
How often should you change your HVAC filter?
As a general rule, replace pleated air filters and furnace filters in your home every 90 days.
- The longer an air filter is in place, the more dirt, dust and allergens are trapped
- A clogged furnace filter decreases its efficiency.
- We recommend MERV13 air filters
